The Stator Gator
Installation of the Stator Gator PUH Series
This gator is an optically coupled sensor designed to be used with the Futaba GV-1 governor and installed on Zenoah PUH series engines.
The red shielded wire will plug into the black engine kill lead.
The black shielded wire should be connected to the engine case or cylinder head.
The Futaba J connector plugs into the GV-1 "sensor" slot.
Mount the PUH gator with foam tape (away from antenna) and route wires away from excessive heat and chafing areas..
The sensitivity will not display on the GV-1.
Follow the manufacturer's directions for governor setup.